Installing the Mod Chip:

• Carefully bend back the pins of the chip so that they are flat and even with the chip.
• Solder the wires to the chip following the diagram below.
  
  
• 

• For Pre-Wired Mod Chip Kits here is the Color Coded Diagram for you:
  
  

  Pin 1: Red	Pin 8: Black
  Pin 2: Not used	Pin 7: Not used
  Pin 3: Not used	Pin 6: Yellow
  Pin 4: Not used	Pin 5: Green

• Check which type of playstation you have by turning the unit upside down and looking at the label.  It will say SCPH-XXXX. XXXX= Model #.

Choose your model below for installation information: